KG Clob rear bumper. Good OTK / Tony alternative, same mounting points as OEM OTK. 53.25" Overall length. Mounting kit not included. Weight: 4.5 pounds (with mount)
KG C3 rear bumper. Good OTK / Tony alternative, same mounting points as OEM OTK. 53.25" Overall length. Mounting kit not included. Weight: 4.5 pounds (with mount)
$114.95
Click here
to subscribe for 'Back-in-stock' notifications
KG CIK Adjustable Plastic Adult Rear Bumper, This bumper is designed for sprint kart racing and replaces the standard steel bumper . Required by some rules and organizations. Adjustable width, 120-140cm (47-55"). Mounting kit not included.
Mini and babykart new revolutionary rear spoiler. This is an adjustable rear spoiler to fit variable widths. External width min 1000 mm - max 1170 mm. "Adult" style mounting kit required.
Ultra lightweight at about 7oz/198g per side, saving a total of 13oz/369g (over 3/4 pound) in the brackets only! Fits KG, Italkart, Intrepid, Praga, OTK, Tony, Kosmic, FA, CRG/KG and others. 1-Pair, 2 mounts included.
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper features a unique "quick release" function that allows eay removal of the rear bumper. Also fits OTK & KG bumpers...or any bumper that has a 60mm channel for the mounting bracket.
Full titanium version of the Righetti rear bumper mount. Tubular section is half the weight, triangular mount 100% GR2 welded titanium, will not break like the original composite mount. 1-Pair, 2 mounts included with hardware.
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper features a unique "quick release" function that allows eay removal of the rear bumper. Also fits OTK & KG bumpers...or any bumper that has a 60mm channel for the mounting bracket.
Ideal for Road Racing. Less aerodynamic drag compared to plastic CIK bumpers. Bergfelt's Bumpers are made from quality 3/4" od, mild steel tubing and are MIG welded. We use mild steel because the bumper should bend in a hard collision. As the bumper bends, it absorbs the shock protecting the driver and the chassis. The bumpers are supplied unfinished, i.e. they are not chrome plated or painted. We leave that up to the customer. Select between 610mm and 620mm (CRG karts) Center to Center frame spacing. Requires 20mm bushings.
Saves nearly 1/4 pound when replacing the steel hardware. This new unique style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts including CRG, OTK, Tony, IPK, Praga, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.
The FTP "Floating" bumper bolt kit allows the rear bumper mount to float and not bind on the hardware. No need for additional backup mounts, cables, etc. or the need to run the mounts sloppy loose to free up the kart. No special tools needed. Fits most karts, CRG, OTK, Tony, Kosmic, Intrepid, Praga, OK1, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.
Only 61g/2.2oz...about half the weight of the steel equivalent bolt. Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread. Save 50% on 10-pack of SALE price!
Nylon rear bumper insert for Praga, Italkart, Intrepid, OK1, FTP bolt kits, RLV/KG and Righetti bumper mounts, etc. Color may vary between white, grey or black. Sold individually.
Perfect to protect plastic CIK rear bumpers from exhaust. Features an aluminized fiberglass insulating tape that has an adhesive on one side and aluminized fiberglass insulating tape on the other, to protect your plastic side panels, engine air scoops, etc. from exhaust pipe heat. Heat shield is capable of with standing 400 degrees constant heat of 500 degrees intermittent heat.