Full titanium version of the Righetti rear bumper mount. Tubular section is half the weight, triangular mount 100% GR2 welded titanium, will not break like the original composite mount. 1-Pair, 2 mounts included with hardware.
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
We recommend the FTP "Floating" Bumper Hardware, Click Here
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper features a unique "quick release" function that allows eay removal of the rear bumper. Also fits OTK & KG bumpers...or any bumper that has a 60mm channel for the mounting bracket.
Saves nearly 1/4 pound when replacing the steel hardware. This new unique style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts including CRG, OTK, Tony, IPK, Praga, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.
High quality, Grade 5, ultra lightweight titanium hardware, works with OEM bumper bolt hardware. 47% lighter than steel, Corrosion resistant, Reduce overall weight. 45 grams (1.6 oz) each.
High quality, lightweight, TIG welded titanium GR2, weigh in at 1.2 pound even per side, saving almost 2.4 pounds from the steel nerf bars.
High quality, lightweight, TIG welded titanium GR2, OTK/Tony M6 Style weigh in at 1.2 pound even per side, saving almost 2.4 pounds from the steel nerf bars.
High quality, lightweight, TIG welded titanium GR2 KG Stilo EVO nerf bars weigh in at 1 pound even per side, saving almost 2 pounds from the steel nerf bars. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. CRG owners looking to save weight (3.2# in only nerfs), simply get EVO pods which are lighter anyways and graphics fit. Fits most Intrepid, Italkart, Praga, Arrow, Topkart or any karts that use KG EVO Stilo pods. Very limited supply in stock!
High quality, lightweight, TIG welded titanium GR2 KG lower hoop weigh in at 0.4 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. Fits most karts with a removable lower hoop, including CRG. 20mm tube diameter, Center to center is 450mm, 205mm overall length.
OTK/Tony style titanium LOWER bumper bar w/ integrated pedal stop. 9.5 oz, nearly half the weight of OEM steel. Bumper extends forward 1inch while maintaing original pedal stop location.
OTK/Tony style titanium LOWER bumper bar w/ integrated pedal stop. 9.5 oz, nearly half the weight of OEM steel. Standard length, use with KG / OTK standard length upper titanium bumper.
CRG style titanium upper bumper hoop, about 2in longer than "standard KG". High quality, lightweight, TIG welded titanium GR2 KG upper hoop weigh in at 0.8 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. 350mm from front face to end of flat mounting tab.
High quality, lightweight, TIG welded titanium GR2 KG upper hoop weigh in at 0.8 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. Standard length, same as KG and OEM OTK, 300mm from front face to end of flat mounting tab.
Titanium fairing brackets fit most karts. 2.5oz per bracket, nearly half the weight of standard steel brackets. 35-80-45mm sections, 10" overall length.
Click here
to subscribe for 'Back-in-stock' notifications
Click here
to subscribe for 'Back-in-stock' notifications
OTK/Tony style titanium fairing brackets for M6 bodywork saves almost 4oz (1/4 lb) compared to OEM steel. Get all three brackets, top and bottom and save close to 5oz.
