Titanium Birel/ART Freeline steering shaft (replaces 10.7297.00-CR), identical to OEM at half the weight and MUCH HIGHER quality! 490mm length, for full size kart (AM29, R30, RY28, RY30, CRY30 shifter & DD2). 10oz weight, 9oz weight savings. 490mm Length.
OEM original Birel/ART Freeline steering shaft. 490mm length, for full size kart (AM29, R30, RY28, RY30, CRY30 shifter & DD2). 490mm Length.
ART / Birel aftermarket steering shafts. 500mm length.
HIGH-TECH complete 2-piece Birel/ART Freeline steering shaft with removable pitman. For full size kart (AM29, R30, RY28, RY30, CRY30 shifter & DD2). 490mm Length.
Replacement HIGH-TECH shaft ONLY, 490mm.
Lightweight titanium shaft. Direct replacement HIGH-TECH shaft ONLY, 490mm. IDENTICAL and better quality than OEM! Weighs in at 9oz, saves nearly 1/2_lb! 490mm Length.
Universal lightweight titanium shaft with adjustable pitman. 20mm OD, 490mm length. Weighs in at 9oz, saves nearly 1/2_lb! Simply locate pitman on shaft, drill one 6mm hole to secure. Shaft available with or without aluminum pitman.
OEM shaft with 3-position, full length shaft.
TITANIUM OEM Style R2.0, 25-31, (replaces FC0.05293) full length shaft. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving nearly ½ pound compared to a steel steering shaft. 10oz weight, 10oz weight savings.
OEM shaft with dual position, #35 #40, full length shaft.
OEM CRG standard 3-position, 6-hole full length shaft. 520mm Length.
Aftermarket CRG Style 3-position, 6-hole shaft, extra long 510mm length.
OEM Style 3-position (replaces FC0.01513) full length shaft. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving nearly ½ pound compared to a steel steering shaft. Also fits VLR karts. 520mm Length.
OEM Style R2.0, 35-40, (replaces FC0.05270) full length shaft. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving nearly ½ pound compared to a steel steering shaft.
OEM IPK shafts for Praga, Italkart, Intrepid, FK, etc. 20mm diameter w/ 8mm stud. See dimension chart.
AFTERMARKET OTK, Tony Kart, Kosmic, steering shaft. 10mm stud with 4 hole pitman. 38/50mm is standard. 45/55mm (w/ SLOT) shaft has a very clear and visible oval hole in the pitman to help identify.
OEM OTK, Tony Kart, Kosmic, steering shaft. 10mm stud with 4 hole pitman. 38/50mm is standard. 45/55mm shaft has a very clear and visible oval hole in the pitman to help identify. Available in 490mm and 510mm.
OTK/Tony style full length shaft. Made identical to OEM dimensions. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving 10oz compared to a steel steering shaft. 38/50mm is standard. 45/55mm shaft has a very clear and visible oval hole in the pitman to help identify.
Chrome Wildkart replacement shaft ONLY. Pre-drilled with 4 mounting holes to adjust pitman. Old picture shown with only 3-holes.
Goes on the end of the shaft to prevent the the end from collapsing down while tightening the hub, OD of reinforcnemnt is 15.9mm, to fit most euro 20mm OD shafts.
Easily lock down the steering shaft by simply tighening down on the pinch-bolt for front end alignments. Fits 20mm shaft. 31mm overall width.
Uniball for the bottom of steering shaft. 10mm ID x 26mm OD x 14mm Height. Fits OTK karts, Tony Kart, FA, Kosmic, etc. Highest quality, Made in Germany.
Standard quality 10mm uniball for the bottom of steering shaft. 10mm ID x 26mm OD x 14mm Height. Fits OTK karts, Tony, FA, Kosmic, etc.
10mm uniball for the bottom of steering shaft. 10mm ID x 26mm OD x 14mm Height. Fits OTK karts, Tony Kart, FA, Kosmic, etc. Highest quality, Made in Japan.
8mm uniball for the bottom of steering shaft. 8mm ID x 22mm OD x 12mm Height. Highest quality. Made in Germany.