Home :: Products Map

Products Map

# ( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z #


Alfano USB-RS485 Data transfer for PROIII Evo / M10 Evo - A4220
SKU: A4220
A4220 – USB-RS485 Data transfer for PROIII Evo / M10 Evo
$39.00
Market price: $65.00 save 40%
Qty
Aluminum Axle Collars
SKU: f11

Alternative to using setscrews in the axle. Use on the back side of the hubs to help keep the hubs from sliding inward. Collars are made from high grade billet aluminum and are cut for keyways. Available in 30, 40, 50mm.

$12.95
Qty
Aluminum Frame & Sprocket Guard
SKU: SKU23872
Protects against damaging your chain/sprocket/sprocket hubs when hitting curbs or for those off track excursions.Protects against thrown chains when hitting curbs meaning you get to finish the race.
$31.15
Market price: $43.95 save 29%
Qty
Aluminum Recovery Catch Bottle w/ Drain Valve
SKU: SKU771801

Overflow tank for the fuel tank, carb, radiator, etc.

$15.95
Qty
Aluminum Rotax Starter Gear Holder - Wildkart
SKU: SKU45797

This tool keeps the clutch and starter gear from turning while removing the clutch. Color may vary.

$59.95
Qty
Aluminum Seat Washers - 40mm OD
SKU: SKU25748
Extra wide washers to help distribute the load on the seat and reduce the chance of puncturing through. Sold individually.
$2.00
Qty
Aluminum Seat Washers - 50mm OD
SKU: SKU32710

Extra wide washers to help distribute the load on the seat and reduce the chance of puncturing through. Sold individually.

$2.00
Qty
Aluminum Split Collar - 30mm
SKU: SKU1896
Aluminum split collar used on 30mm axles as well as a frame guard on 30mm karts. 11mm (0.4") thick - Will keep the chassis off the ground by this amount. Thick enough to prevent the frame from getting ground down but thin enough to minimize obstruction.
$12.95
Qty
Aluminum Sprocket Guide / Guard
SKU: SKU22781

4-piece aluminum sprocket guard, includes mounting hardware. 9" overall diameter.

$17.95
Qty
Aluminum Throttle/Brake Cable Stop (2-bolt)
SKU: SKU400192
2-bolt aluminum cable stop. 27mm length, 12mm diameter. Used for throttle or brake safety cables.
$7.95
Qty
Aluminum Tie Rod - Hex
SKU: SKU1041

Hex Aluminum Tie Rod

$10.95
Qty
Aluminum Valve Stem Cap (4-Pack)
SKU: SKU828481

Aluminum valve stem cap with silicone rubber seal. Sold as a 4-pack.

$4.95
Qty
AMC Brake Bleeder
SKU: AMCBLEEDER

Comes standard with a 10mm tip.

$58.95
Qty
AMC Filter Cup - TM28
SKU: SKU26086

AMC aluminum filter cup fits the Mikuni TM28 carb for 80 shifters.

$22.48
Market price: $44.95 save 50%
Qty
Amsoil Briggs & Stratton Synthetic 4T Racing Oil
SKU: GBS2960-EA

Briggs & Stratton® oil specifically designed to help racers elicit the most horsepower and longest life from their engines. Synthetic 4T Racing Oil is proven in the lab and on the track to provide increased performance in kart, junior drag, quarter midget and other racing applications. It offers benefits other oils simply can’t match.

$15.95
Qty
AMV Aluminum TIGER Wheels, Black (1-pair)
SKU: SKU673614

High quality aluminum wheels, includes bead locks. Sold in pairs.

$132.00
Qty
AMV Aluminum Vented Wheels, Black (1-pair)
SKU: SKU6736114

High quality aluminum wheels, includes bead locks. Sold in pairs.

$132.00
Qty
AMV Aluminum Vented Wheels, Polished (1-pair)
SKU: SKU67361132

High quality aluminum wheels, includes bead locks. Sold in pairs.

$132.00
Qty
AMV Mg OXITECH 3F (Sold in pairs, 2-wheels)
SKU: OXI3F1

The new 3F model, thanks to an outer offset and a no-spokes design, allows to optimize the performance of medium-hard tires. It is the right choise for OK/TAG classes and for SHIFTER classes using medium-hard tires or when racing in no-grip race tracks. The low-volume design and the low pressure AMV casting process allow an optimal balance between grip and sliding of the chassis.

FEATURES
• AMV low pressure casting
• 100% pure AZ91 magnesium
• Heat treated
• Completely cnc machined
• Low volume design
• Designed for easier and faster tire mounting
• Exceed CIK FIA rim standardisation
• Light aluminum bead retaining screws included
• High quality tubeless valve included
• 100% proudly made in Italy

$264.95
Qty
AMV Mg OXiTECH 9F (Sold in pairs, 2-wheels)
SKU: OXI9F1

9F Design & Advantages: The wheel's 9 hole design delivers superior dissipate heat. When used in combination with the 9F rear hubs, with aligned hole design, the 9F wheel/hub combo provides unparalleled heat dissipation.Superior heat dissipation for more stable tire temperature and pressure. Free chassis during high(est) grip conditions. OXiTECH for corrosion resistance and easy cleaning.

FEATURES
• AMV low pressure casting
• 100% pure AZ91 magnesium
• Heat treated
• Completely cnc machined
• Low volume design
• Designed for easier and faster tire mounting
• Exceed CIK FIA rim standardisation
• Light aluminum bead retaining screws included
• High quality tubeless valve included
• 100% proudly made in Italy

$220.00
Qty
AMV Mg OXiTECH LYNX (Sold in pairs, 2-wheels)
SKU: OXI9F23

The Lynx Design & Advantages: The Lynx is the latest wheel from AMV featuring Super Low Volume, a medium spoke design, and greater backspacing (66mm rear / 51mm front). The resultant design has many advantages. Super Low Volume provides even greater air pressure consistency and tire temperatures. The medium spoke design, with greater backspacing, provides the ultimate balance between more feel on corner entry while generating superior mechanical grip on corner exit. Beyond this, the Lynx has all the typical AMV OXiTECH advantages.

FEATURES
• AMV low pressure casting
• 100% pure AZ91 magnesium
• Heat treated
• Completely cnc machined
• Low volume design
• Designed for easier and faster tire mounting
• Exceed CIK FIA rim standardisation
• Light aluminum bead retaining screws included
• High quality tubeless valve included
• 100% proudly made in Italy

$279.00
Qty
AMV Mg OXiTECH Tiger
SKU: OXITIGER1

AMV OXiTECH is an innovative plasma electrolytic anodizing treatment which permits obtaining extraordinary characteristicsof protection from corrosion and wear of Magnesium. Main properties of the treatment are: WEAR RESISTANCE, Unlike traditional treatments, the process uses high currents which create a plasma on the surface. The micro-melting is thus obtained of the oxide layer which mineralizes and compacts, thereby increasing hardness and wear resistance. CORROSION RESISTANCE, The compact layer of ceramic oxides protects the magnesium from corrosion, providing increased protection compared to traditional treatments. ENVIRONMENT FRIENDLY, the process does not require the use of chemical substances and therefore has a very low impact on the environment and health.

$118.00
Qty
AMV VG Tiger Wheels (Sold in pairs, 2-wheels)
SKU: AMVVG1301

-

$198.00
Qty
Anodized Aluminum Finish Washers - 6x20mm
SKU: SKU304091
For floorpans, steering wheels, etc.
$1.60
Qty
Anodized Aluminum Finish Washers - 8x22mm
SKU: SKU327251
Typically used on the tie rod ends, bearing cassettes, etc.
$2.00
Qty
Anodized Aluminum Finish Washers - 8x33mm
SKU: SKU23356
For seat mounting and seat struts.
$2.00
Qty
ART / Birel / Freeline Nerf Bar Set (Left & Right)
SKU: BIRELTITANIUMNERFS

NOT ACTUAL PIC SHOWN. Add email address to get notified when available, hopefully end of February. High quality, lightweight, TIG welded titanium GR2, weigh in at 1.2 pound even per side, saving almost 2.4 pounds from the steel nerf bars.

$399.95
Qty Out of stock
Click here to subscribe for 'Back-in-stock' notifications
ART / Birel 1-piece Standard Steering Shaft - OEM - L490mm (Full size)
SKU: 10.7297.00-CR

OEM original Birel/ART Freeline steering shaft. 490mm length, for full size kart (AM29, R30, RY28, RY30, CRY30 shifter & DD2).

$88.95
Qty Out of stock
Click here to subscribe for 'Back-in-stock' notifications
ART / Birel 2-Piece Steering Shaft HIGH-TECH - OEM - L490mm (Full size)
SKU: 10.14946.00

Latest HIGH-TECH complete 2-piece Birel/ART Freeline steering shaft. 490mm length. For full size kart (AM29, R30, RY28, RY30, CRY30 shifter & DD2).

$119.95
Qty
ART / Birel Kingpin Bolt - 8x90mm
SKU: 20.9703.06
$6.95
Qty Out of stock
Click here to subscribe for 'Back-in-stock' notifications