- per page
Large rubber jet box/carrier for most style jets and needles. PERFECT for Dellorto carbs! Holds 12 main jets, 8 external pilots, 8 internal pilots, 4 needles and room for other small bits. Jets and needles NOT included.
OEM EVO "XS" carb (20 stamped on side) w/ 130 main jet. AS SHOWN.
Euro-style solid band non-perforated stainless hose clamp with thumb knob. 40-60mm diameter, 9mm wide. Fits most between the carb and rubber intake, Rotax Max, CR125, Rok GP/Shifter, TM KZ, etc.
VHSH / VHSB , KZ, Rok Shifter / GP. Plug only. O-ring required.
Adjustable main jet for VHSH/VHSB carburetors, replaces existing float bowl nut. Easily make on-the-fly adjustments to the main jet by simply turning the adjusting screw. Length 29cm outside carb. Supplied with 3 adjustable main jets - sizes 200, 220 & 250, which effectively covers the standard main jet range from 140 to 190. Includes: Float bowl nut/adaptor, Adjustable needle, cable assembly, Needle return spring, 3 sizes of main jet replacements. Not RMAX Legal
Used to remove and install Dellorto needle/seat and emulsion tube. 1/4" Drive.
Dellorto Needle & Seat for VHSH and VHSB carbs. #150 most common for Rotax Max, #250 is standard for KZ and Rok GP.
Contructed of aluminum, protects the needle and slide while removed from the carb. Fits Dellorto VHSB rotax carbs. Cap NOT included.
Properly measure all carb jets to be sure its within Rotax spec. 0.05mm increments.
New improved Jet block has storage for 2 needles, 20 main jets, 5 pilot jets, 5 minor/idle jets, 3 emulsion tubes and 2 needles (not included). Also has built in bowl nut wrench. Now in PLAIN ALUMINUM Finish (NOT ACTUAL PIC SHOWN). For Rotax, KZ, ICC, Vortex Rok, etc. Jets and needles NOT INCLUDED.
- per page
