AMC aluminum filter cup fits the Mikuni TM28 carbs. 44mm ID, 63mm OD, 21mm overall length.
Honda tee with ball check valve, originally from the old Honda Odyssey. Valve allows float bowl to fill and diverts fuel to the return when full. Perfect to reduce the pressure on the needle and seat.
10 piece wire set with spiral knurling. For cleaning popular size jets and carb body holes/passages.
This is a small reservoir that sits next to the carb to simulate gravity feed and reduce pressure on the need & seat, previously called the "Magic Can" from the old Trackmagic days. Fuel is supplied through the top to the carb. Any unused fuel is pushed back out of the 2nd nipple to the tank through the return line, similar to having a tee.
Comes with rubber cap, locknut, cable adjuster and 90° tube. For Dellorto carbs, ICC / KZ, Rok GP, Rotax Max, also fits Mikuni and Keihin carburetor caps. Threaded end is 6x0.75mm.
Large rubber jet box/carrier for most style jets and needles. PERFECT for Dellorto carbs! Holds 12 main jets, 8 external pilots, 8 internal pilots, 4 needles and room for other small bits. Jets and needles NOT included.
This rubber jet box stores the following:
- Slots for 20 Mikuni & Keihin main / pilot jets
- 3 slots for jet needles for Keihin PE / PJ / PWM / PWK & Mikuni 4/5/6 series only
- Jets / Needles NOT included
